How to capture live running traces from MSO7104B oscilloscope with the help of MATLAB without any delay?

Question

% Create instrument object for Agilent oscilloscope oscilloscope = visa('agilent', 'GPIB0::9::INSTR'); % Change the VISA address as per your oscilloscope configuration % Set communication parameters

set(oscilloscope, 'InputBufferSize', 1024);
set(oscilloscope, 'Timeout', 10);
%

Open communication with the oscilloscope fopen(oscilloscope); % Configure oscilloscope settings

fprintf(oscilloscope, ':WAVEFORM:FORMAT BYTE'); % Set waveform format to BYTE
fprintf(oscilloscope, ':WAVEFORM:UNIFORM:ENABLE 1'); % Enable uniform waveform data
fprintf(oscilloscope, ':WAVEFORM:POINTS 10000'); % Set the number of points to capture
fprintf(oscilloscope, ':WAVEFORM:SOURCE CH1'); % Select the waveform source (e.g., Channel 1)
fprintf(oscilloscope, ':WAVEFORM:DATA?'); % Request waveform data
%

Read and process the waveform data continuously

isCapturing = true;
while isCapturing
%

Read waveform data

 waveformData = binblockread(oscilloscope, 'int16'); % Read waveform data as int16
    waveformData = waveformData'; % Transpose the data for easier processing
%

Perform processing or analysis on the waveformData % Example: Calculate the maximum value of the captured waveform maxValue = max(waveformData);% Plot the captured waveform in real-time

 plot(waveformData);
    drawnow;
%

Check for an exit condition (e.g., press a key to stop capturing)

if kbhit % Check if a key is pressed
        isCapturing = false;
    end
end

% Close communication with the oscilloscope fclose(oscilloscope); % Clean up the instrument object

delete(oscilloscope);
clear oscilloscope;

I tried various codes and only this code suited me to an extent. I need to capture live running traces without any delay or pause with the help of MATLAB