uploading hello-world program on micaz : programmer is not responding

Question

I have a problem when trying to upload hello-world program to micaz mote.

I followed this tutorial to upload hello-world program on hardware, but when I tryied to run the command :

make hello-world.upload

I have this error message :

using saved target 'micaz'
avr-objcopy -O srec hello-world.micaz hello-world.srec
uisp -dprog=mib510 -dserial=/dev/ttyS0 -dpart=ATmega128 --wr_fuse_h=0xd1--wr_fuse_e=ff --erase --upload if=hello-world.srec --verify 
make: uisp: Command not found
make: *** [hello-world.upload] Error 127
rm hello-world.srec

I think that the problem is that uisp command is not installed, so I tryed to install it with :

sudo apt-get install uisp

Then I had this error message :

Err http://us.archive.ubuntu.com/ubuntu/ precise/universe uisp i386 20050207-4ubuntu1
  Could not connect to us.archive.ubuntu.com:80 (91.189.91.13). - connect (111: Connection refused) [IP: 91.189.91.13 80]
Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/universe/u/uisp/uisp_20050207-4ubuntu1_i386.deb  Could not connect to us.archive.ubuntu.com:80 (91.189.91.13). - connect (111: Connection refused) [IP: 91.189.91.13 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Is there someone who has uploaded successfully a program on hardware (micaz mote) ?

Any help ?

Answer 1

make TARGET=micaz blink.upload PORT=/dev/ttyUSB0   //  connect to PC via MIB520

for more information the solution is here and here

Answer 2

I found how to install uisp command, for those who still have the same problem with installing uisp, the solution is here.

After installing uisp I encounter another problem.

When I run :

make hello-world.upload

I have an error message :

using saved target 'micaz'
avr-objcopy -O srec hello-world.micaz hello-world.srec
uisp -dprog=mib510 -dserial=/dev/ttyS0 -dpart=ATmega128 --wr_fuse_h=0xd1 --wr_fuse_e=ff --erase --upload if=hello-world.srec --verify
Programmer is not responding.
make: *** [hello-world.upload] Error 2
rm hello-world.srec

Any help ?

Answer 3

Answer to your question is you need to install new version of uisp:

    $ wget "http://kasun.ch.googlepages.com/uisp.tar.gz"
    $ tar -xvzf uisp.tar.gz
    $ cd uisp
    $ ./bootstrap
    $ ./configure
    $ make
    $ sudo make install