so im working on my final year project: Study and Implementation of the RADIUS Protocol.
First of all, let me give you an overview of our current configuration. We have successfully completed the installation and configuration of all the necessary roles to implement the RADIUS protocol. These roles include AD DS, DHCP, DNS, NPS, and AD CS. Additionally, we have taken care to disable the firewall to allow unrestricted access to RADIUS ports 1812 and 1813. We have also verified the connectivity between the server and the router by successfully pinging.
However, despite these preparations, we are experiencing difficulties in connecting to the network via the router, and the server is not listening. We have checked and confirmed that the IP addresses are correctly configured and consistent between the server and the router. That being said, we are still unable to establish a successful connection.
To provide you with a better understanding of our current configuration and the nature of the problem, I have attached a video detailing our server configuration, as well as a Wireshark capture to show packet exchanges.
We would greatly appreciate any assistance you can provide in resolving this issue. If you need any further information or additional details, please let me know.
VMware : Windows Server 2019 (Domain Controller) Domaine : pfe.local IP : 192.168.10.2/24 Gateway : 192.168.10.10 DNS : 192.168.10.2 DHCP : pool 192.168.10.50 - 192.168.10.100 Routeur : IP : 192.168.10.10 RADIUS server : 192.168.10.2:1812 shared key : PFEadmin2023 WPS is Disabled
Desactivate Firewall RADIUC client with and without VPN Address IP
I didnt read you mentioning if you added the router as a RADIUS client, and configured it properly to trust NPS.